ARB Air Compressor Bracket Installed

[Wanderlust]

Heyo

I linked the guides I used to help with wiring. I ended up scrapping the majority of the ARB harness except for the main power and switch wire because I do not plan to run air lockers. Wife & I 4WD has a simple wiring video where you can use part of the switch wiring (with diode from harness) for simple on/off function. I wired it to AUX 1 on my factory AUX switch.

ZRoadz Compressor Bracket:

2024-2025 Tacoma ARB Compressor Bracket

Videos I used for wiring install:

ARB Compressor Simple Wiring

4th Gen Tacoma Factory Aux Switch Wiring

Finished Product:

Sponsored

 

[theKurt]

Clean. Nice article. Thanks!

 

[Andrace]

Thanks for posting, I have a ARB dual brushless and attempted to confirm if the kit was compatible but never got an email reply, and their phone number is only a directory so equally useless. I got the kit anyway, figuring I could make it work somehow.

From what I can tell it looks like it will work but I'll update with confirmation.

 

[Wanderlust]

Thanks for posting, I have a ARB dual brushless and attempted to confirm if the kit was compatible but never got an email reply, and their phone number is only a directory so equally useless. I got the kit anyway, figuring I could make it work somehow.

From what I can tell it looks like it will work but I'll update with confirmation.

It looks like they share the same mounting. However, on the brushless, the air fitting is on the opposing side of the filters rather than on top of the shroud. You may need to move things around. Luckily, the bracket has some wiggle room to move the compressor up/down, side-to-side.

Best of luck and I hope to see the end result!

Sponsored