Aspire V2 Fang Lights install - 2025 TRD Sport

[Iqudayo]

I just finished installing the Aspire V2 fang lights on my Tacoma. Whole install took about 45 min, but 30 of that was getting the factory plastic pieces off and zip tying the wires out of the way.

Legitimately plug and play. Once the Fang light is in the bumper, you untwist the yellow turn signal bulb, take it out of the housing plug it into the female end of the prewired adapter, plug the other adapter end into the truck wire housing and put the bulb back in.

I finished in the dark, so pics aren't great. But will upload new pics later

Fantastic install, now you just need to make your blinkers switch back leds and you’ll love it even more.

Sponsored

 

[ThatOneNiko]

Fantastic install, now you just need to make your blinkers switch back leds and you’ll love it even more.

What product do you use for under headlight thingy? I have lasfit switchbacks for my turn signals. I want to make it stock looking and yours look sharp. and are they Plug and play type too?

 

[Iqudayo]

What product do you use for under headlight thingy? I have lasfit switchbacks for my turn signals. I want to make it stock looking and yours look sharp. and are they Plug and play type too?

Plug and play e-bay

For Toyota Tacoma 2024 LED Front Bumper Fog Lights Driving Lamps DRL Turn Signal

 

[ThatOneNiko]

Plug and play e-bay

For Toyota Tacoma 2024 LED Front Bumper Fog Lights Driving Lamps DRL Turn Signal

Thank you

 

[TheZMaster]

I just finished installing the Aspire V2 fang lights on my Tacoma. Whole install took about 45 min, but 30 of that was getting the factory plastic pieces off and zip tying the wires out of the way.

Legitimately plug and play. Once the Fang light is in the bumper, you untwist the yellow turn signal bulb, take it out of the housing plug it into the female end of the prewired adapter, plug the other adapter end into the truck wire housing and put the bulb back in.

I finished in the dark, so pics aren't great. But will upload new pics later

Did you use any tools to pop the factory pieces off or just hand only? Any tips for getting them off? Did you have to mess with fuses or anything or is it truly plug and play?

 

[TheZMaster]

Plug and play e-bay

For Toyota Tacoma 2024 LED Front Bumper Fog Lights Driving Lamps DRL Turn Signal

Did you use any tools to pop the factory pieces off or just hand only? Any tips for getting them off? Did you have to mess with fuses or anything or is it truly plug and play?

 

[Iqudayo]

Did you use any tools to pop the factory pieces off or just hand only? Any tips for getting them off? Did you have to mess with fuses or anything or is it truly plug and play?

you can do a search there is someone here that did an installation video, or check you tube

 

[maxx075]

Did you use any tools to pop the factory pieces off or just hand only? Any tips for getting them off? Did you have to mess with fuses or anything or is it truly plug and play?

Unless you want to break the tabs on the OEM pieces, I would suggest just taking the front clip of the truck off. It's an easy job to do if you watch a video how to do it.

 

[TheZMaster]

you can do a search there is someone here that did an installation video, or check you tube

I watched it, he made it seem easy to get those factory pieces off but everybody is saying how hard it is. I saw he messed with the fuses too but he didn't have the plug and play type. If you have the plug and play type, do you still have to do anything with the fuses?

 

[Iqudayo]

I watched it, he made it seem easy to get those factory pieces off but everybody is saying how hard it is. I saw he messed with the fuses too but he didn't have the plug and play type. If you have the plug and play type, do you still have to do anything with the fuses?

I watched the video and did what he said yes it does tap to the fuse box.

It was relatively easy

 

[Thew_Tang_Clan]

Did you use any tools to pop the factory pieces off or just hand only? Any tips for getting them off? Did you have to mess with fuses or anything or is it truly plug and play?

I did not, I just jammed my arms down behind the lights and worked them free...scratched the sh*t out of myself. Someone up thread suggested using a Hole saw bit for your drill, which I am upset I didn't think of. I wasnt keeping the plastic pieces, so I should have just cut through them.

 

[Thew_Tang_Clan]

I watched it, he made it seem easy to get those factory pieces off but everybody is saying how hard it is. I saw he messed with the fuses too but he didn't have the plug and play type. If you have the plug and play type, do you still have to do anything with the fuses?

For the Aspire lights...there is a fuse splitter on one end. You just pull the fuse (the instructions indicate which one), put the splitter in and put the fuse back in on top. I did cut a hole and feed the wire through the plastic box that the fuses are in (like in the youtube video posted)..just to make it look cleaner, but it was a 30 second thing.

Sponsored