Carista OBD2

[Suzay]

I finally got a chance to use my Carista. $9.99 subscription which I canceled immediately was totally worth it for these three things:

1) Change my blinker tap to 7 flashes instead of Toyota’s standard of 3 flashes. Since I only use tap on the highway, 7 flashes is perfect for changing lanes at highway speeds. If I’m turning in town, I’m not tapping the blinker, it’s a full-on engage at that point.
2) Auto-down of all windows with the keyfob
3) Remove the annoying-ass seatbelt chimes!

For those interested, here are all the options it gave me:

For the speaker volume, is it better than before? I gotta turn my volume up to 30+ get enough sound/music

Sponsored

 

[Ruissimo]

I didn't mess with the speaker volume to be honest. But yes, mine is usually around 20-30, sometimes higher, depending on the source.

 

[FarmHand357]

I'd like to be able to turn off the annoying seat belt chime as well as add the all-windows-down using the key fob functionality. I get that I'll need a subscription to do this.

It's also my understanding that upon completion, after I cancel my subscription, these settings will stay in effect.

My question is, at this point, can I also remove the Carista from my ODB2 plug and still keep the changed settings? After making any Carista adjustments, I'd like to be able to resume using my old ScanGauge in the OBD2 port and have not been able to find a reference about whether everything new will continue to work after unplugging the Carista.

Any info will be greatly appreciated; thanks...

 

[maxx075]

I'd like to be able to turn off the annoying seat belt chime as well as add the all-windows-down using the key fob functionality. I get that I'll need a subscription to do this.

It's also my understanding that upon completion, after I cancel my subscription, these settings will stay in effect.

My question is, at this point, can I also remove the Carista from my ODB2 plug and still keep the changed settings? After making any Carista adjustments, I'd like to be able to resume using my old ScanGauge in the OBD2 port and have not been able to find a reference about whether everything new will continue to work after unplugging the Carista.

Any info will be greatly appreciated; thanks...

Yes you can remove it and the changes will still be there.

It's a software setting that you're changing that isn't dependent on the device still being connected.

 

[Statherós K-9]

Several things related to the Audio that makes it better.

https://www.tacoma4g.com/forum/threads/the-stereo-audio-sound-post-dont-skip-this-one.18113/

Sponsored