TRD Off-Road stock suspension with 295/70R17 (33.3”) on 17” Method 314 (+25 offset), No rubbing!

[IAmGroot]

Just installed these 295/70R17 (33.3”) on 17” Method 314 (+25 offset) on my TRD OR with stock suspension and there’s no rubbing! I haven’t fully flexed everything out, but it all looks like it’ll fit when stuffed. Also didn’t have any rubbing when turning into my driveway at full lock. I’ll be updating once I get it on some ramps in this post and on my IG below.

IG: @taco_2187

Sponsored

 

[Powhunter]

That looks really good. I was actually contemplating this size as well with that same offset. I do plan on off-roading and that looks really close to the fender wells. Might be better with a level?

 

[drabon74]

To me, the +25 offset is the sweet spot. I like the wider stance but not a fan of a lot of poke. Your truck looks great!

 

[IAmGroot]

That looks really good. I was actually contemplating this size as well with that same offset. I do plan on off-roading and that looks really close to the fender wells. Might be better with a level?

It’d likely be better, yes

, but I just put an 8” ramp on both the front driver and rear passenger sides of the truck, getting it pretty decently stuffed, and I still couldn’t see any spots where it was/would rub. Maybe at that kind of stuff if you turned too much in one direction you’d touch some of the liner, but that’s really all I can see happening with this setup.

 

[IAmGroot]

To me, the +25 offset is the sweet spot. I like the wider stance but not a fan of a lot of poke. Your truck looks great!

Thanks dude! I agree, +25 is the perfect amount of poke.

 

[Type2Diabetes]

Looking good Colby!

 

[Goriders]

Those rims look good.

 

[Taco Azul]

Raised white letters are the chef’s kiss

 

[apryakhin]

@IAmGroot Do you think 285/70/R17 tires would also work with this method wheels? I am all over the forum and trying to decide what wheels to go for. Mine is same color as yours but TRD Sport. It does seem that I am not that far away. I am based off Santa Cruz.

 

[apryakhin]

Maybe I should just get the same wheels/tires. What width are your method 314 rims?

 

[IAmGroot]

Looking good Colby!

@IAmGroot Do you think 285/70/R17 tires would also work with this method wheels? I am all over the forum and trying to decide what wheels to go for. Mine is same color as yours but TRD Sport. It does seem that I am not that far away. I am based off Santa Cruz.

Howdie neighbor! Yeah I think those would work considering mine are larger and they fit.

 

[IAmGroot]

Maybe I should just get the same wheels/tires. What width are your method 314 rims?

7.5”

 

[Muckle]

Have you been able to do a full suspension cycle and see if there is any rubbing? I'm looking at this setup in a KO3 with stock suspension, plus possibly a leveling kit. Would prefer the 295 over 285, but only if there is no rubbing.

 

[robfultz]

Just installed these 295/70R17 (33.3”) on 17” Method 314 (+25 offset) on my TRD OR with stock suspension and there’s no rubbing! I haven’t fully flexed everything out, but it all looks like it’ll fit when stuffed. Also didn’t have any rubbing when turning into my driveway at full lock. I’ll be updating once I get it on some ramps in this post and on my IG below.

IG: @taco_2187

How much poke? Or same as stock with your +25 offset?
I want a little poke but not extreme.

 

[Fiigtaco]

Looks good!

what do you do for TPMS sensors? Did you have to get your own or does the tire ship have them and just clone the stock wheels?

Sponsored