Anyone else tried 255/80r17?

[jdmz]

Has anyone tried fitting these tires on the stock spare wheel?

Sponsored

 

[TrustButVerify]

Has anyone tried fitting these tires on the stock spare wheel?

The spare steel wheel is 7" wide. The Toyo AT3 lists a 6.5-8.5" wheel.

 

[jdmz]

That looks perfect maybe just need to be aired down a bit?

 

[BJ HOALE]

Clearance

Clearance

i was looking into this size after seeing your post. I went in today to test fit a 34/10.50 17. Should have them on by the end of the week.

 

[TheBandit]

Curious how the rubbing was (if any). I’m also currently looking to upgrade to taller tires on the stock sr5 wheels

 

[Omega351]

i was looking into this size after seeing your post. I went in today to test fit a 34/10.50 17. Should have them on by the end of the week.

33.1” compared to 33.5” how do you like them, any rubbing at full lock in reverse?

 

[BJ HOALE]

I’m loving them! No rubbing at all. I even put the safety plate and mud flaps back on. Took it off road for the first time, and even full truck it didn’t rub. Rides nice.

 

[GMak621]

Those tires look good OP.

I currently have 285/70/17s on the truck. I ended up putting on coilovers and rear coils and now the tires look too small.

I got a killer deal on some Mickey T Baja Boss ATs 255/85/17s (35x10R17). Can’t wait to get them mounted up

 

[jakirsch11]

Stock SR5 4x4, has very little perceivable rake, I had this tire planned a ways before I got the truck, I’m surprised as popular as it was on the much narrower gen3 I’m the first I’ve seen to do this size on a gen4.

I just put Toyo AT3's 255 80 17's on

Confirming you didn't add spacers for 255/80/17s? Width almost looks same as stock in pics... Looks great, going to do same setup.

 

[Romer]

Confirming you didn't add spacers for 255/80/17s? Width almost looks same as stock in pics... Looks great, going to do same setup.

I did not add spacers

 

[Eco-nomadic]

i was looking into this size after seeing your post. I went in today to test fit a 34/10.50 17. Should have them on by the end of the week.

Just confirming these fit without rubbing on a stock SR5 with no lift?
Also do you have a matching spare or are they too big to fit in the spare tire carrier?

Keen to get a bit more diff clearance for my stock SR5 extra cab and these look perfect.

 

[turkey-on-wheat]

BTW, that also fits in the spare tire spot.

I know im late to the game here, but do you think there’s about another half inch of space still left for a spare? I’m considering 34x10.5 r17s (actually 33.5in in diameter) and want to have the same size tire in the spare location. Based on your pics, it looks pretty tight up against the hitch but hard to tell due to the angle. Thanks!

 

[Romer]

I know im late to the game here, but do you think there’s about another half inch of space still left for a spare? I’m considering 34x10.5 r17s (actually 33.5in in diameter) and want to have the same size tire in the spare location. Based on your pics, it looks pretty tight up against the hitch but hard to tell due to the angle. Thanks!

It is really tight right now. Possible, but wouldnt count on it

 

[turkey-on-wheat]

It is really tight right now. Possible, but wouldnt count on it

Good to know. I’ll likely just go with the same set up you’re running but was hoping to keep the width closer to a 265/70 tire. Appreciate it!

Sponsored