ARB Rear Recovery Points + OE Bed Step + SXTH Relo Bracket = doesn’t work

[mikeymtbs]

I mean… this should be super easy. Removed the OE bed step, replaced the bed-step mount with the SXTH mount, used the ARB bolts, mounted it up and it just doesn’t fit. The SXTH mount positions the step too close to the recovery point such that it doesn’t retract fully. See pics.

What am I missing… or, did I get a mis-aligned/welded bracket?

Mike

Sponsored

 

[VBFD Taco]

Looks to me that maybe the SXTH adapter may not have been made to specification?

 

[2battranger]

I have the same exact set up. ARB recovery points and SXTH bracket. Mine is close but does not touch.

 

[gasgasman]

Loosen the three bolts at the top, where the step mounts to the SXTH bracket.
Reposition the step and retighten.

 

[px3_taco]

Mine rubs, not a bunch, but enough to rub off the paint on the recovery hook. I expected better for the price.

 

[lane47]

done.

 

[doc62]

Installed mine on Saturday. Fit was close, but no rub

 

[Richardb106]

Oem bed step? Curious as I have the cheaper Amazon version. I also have the arb recovery points and adapter en route as we speak. Hoping they all work together!

 

[doc62]

Same Amazon step a lot of others bought.

 

[Rich R]

I have a step from eBay plenty of clearance

 

[trailhunger]

I have the complete SXTH RRP setup w/relocate on my TH. No rub but I’m not impressed with its parallel alignment in relation to the ARB bumper once stowed. I guess you have to really look to notice it but for 3+ bones you’d think they get the cosmetics dialed.

That said, the SXTH hooks are really nice & far lighter than the ARB cast iron OEs on my TH

 

[mattlee]

Mine was close but fit.

 

[Norsk]

No issues with mine

 

[Bravada]

Mine is the OEM step, with the SXTH RRP, plenty of room.

Sponsored