T24A-FTS Throttle Body and Throttle Body Elbow Measurements

[JustDSM]

Thought I'd pass on a few measurements taken from a spare Throttle Body and Throttle Body Elbow off of the Tacoma (it's the same for other T24A-FTS platforms like the LC250/4Runner).

Located what I think might prove to be a choke point.. Enjoy!

*My calipers aren't perfectly positioned here, but the ID of the TB is 60mm, which gives us a cross-sectional area of ~2827.4 square mm excluding the throttle plate/bar.

*Choke point located!

With an OD of ~47.75mm and a wall thickness of ~3.25mm, that is an approximate ID (at the radius) of about 41.25mm (~1336.5 square mm).

Sponsored

 

[Devildog81]

There’s only one cold air intake kit that replaces all that, and that’s one K&N makes correct? Someone needs to come up with just a replacement elbow for this.

 

[Rsuperman]

How would we correct this without throwing codes?

 

[Lennyz1]

There’s only one cold air intake kit that replaces all that, and that’s one K&N makes correct? Someone needs to come up with just a replacement elbow for this.

That elbow and TB are all post turbo. CAI kits only do pre-turbo that I am aware of.

 

[JustDSM]

How would we correct this without throwing codes?

Should a replacement for the TB Eblow be/become available, it would not be a part that would trigger a CEL.

 

[Rsuperman]

Thank you fine sir.

 

[Devildog81]

Should a replacement for the TB Eblow be/become available, it would not be a part that would trigger a CEL.

One more thing to add to your R&D list???

 

[Bravada]

Stage 2 of your tune, has me saving up. I can't wait. Sounds like I'll be busy replacing several deficiencies to mo power.

 

[HarryDaHamster]

Nice investigative work. Do you plan to make an upgraded part?

 

[JustDSM]

Nice investigative work. Do you plan to make an upgraded part?

Yes sir!

 

[JustDSM]

VF will be producing these.

"Coming soon...and available for pre-order this week.
Tacoma/4Runner/ Land Cruiser 2.4L Turbo CNC Throttle inlet pipe.
- Dramatically increases the Throttle inlet pipe diameter. No longer restricting down to 40mm.
- CNC Billet Aluminum
- Designed in the USA
- BOLT ON compatibility.
- Replaced the tiny, restrictive plastic one with a larger volume CNC Replacement.

Will provide:
- Dramatically less intake restriction
- More flow
- Better throttle response
and more

Pre-order for introductory pricing of $325!"

Let them know OTT sent you! If 10 of you mention that OTT sent you, he's gonna discount them further to $299!

VF has requested that anyone wanting to purchase and get their "OTT" mention/discount, please email [email protected] and reference the throttle body inlet.

https://vftuner.com/products/vf-throttle-inlet-pipe-toyota-2-4l-turbo

 

[Norsk]

VF will be producing these.

"Coming soon...and available for pre-order this week.
Tacoma/4Runner/ Land Cruiser 2.4L Turbo CNC Throttle inlet pipe.
- Dramatically increases the Throttle inlet pipe diameter. No longer restricting down to 40mm.
- CNC Billet Aluminum
- Designed in the USA
- BOLT ON compatibility.
- Replaced the tiny, restrictive plastic one with a larger volume CNC Replacement.

Will provide:
- Dramatically less intake restriction
- More flow
- Better throttle response
and more

Pre-order for introductory pricing of $325!"

Let them know OTT sent you! If 10 of you mention that OTT sent you, he's gonna discount them further to $299!

https://vftuner.com/products/vf-throttle-inlet-pipe-toyota-2-4l-turbo

How can we let VF know you sent us? Is there promo code we can use?

 

[JustDSM]

How can we let VF know you sent us? Is there promo code we can use?

Great question!

VF has requested that anyone wanting to purchase and get their "OTT" mention/discount, please email [email protected] and reference the throttle body inlet.

Sponsored