What did you do TO / WITH your 4th gen Tacoma today?! 👨‍🏭 🧰 📸

[SnowmanJPS]

Installed a bobbercycles tailgate anti theft piece, changed my shocks from setting 1 to setting 3 which I think is softest (I literally can't figure this out) raised tire pressure from 32-35 and waiting for my rock sliders from Greenlane off-roading and my rigid industries ARB specific bumper lights from @SPV Parts to come in this week

Sponsored

 

[Stebo19]

I do not really like the predator steps. But I do feel they protect a bit from door dings. People are so careless.

The underside of mine are all banged up from hitting the trails. I'd rather beat the steps up than the doors.

 

[nightfire785]

Two things this last weekend. Sliders and a bed mat.

 

[SnowmanJPS]

Cleaned the truck by hand for the first time since getting it January 17th

 

[Astewart23]

Installed the DECKED Drawer System yesterday.

 

[DogsandaTruck]

A busy few days.

• Baja Designs Squadron Pro ditch lights on Cali Raised A pillar light brackets.

• Addictive Desert Designs stealth bumper with the hoop.

• Baja Designs 20 inch s8 light bar in the bumper.

• Warn Evo 10-S in the bumper with a Factor 55 fairlead and Flatlink E.

• Baja Designs SAE fog light replacement in amber.

• Bakflip mx4 bed cover.

• Icon 17 inch wheels with 285/70/r17 Falken Wildpeak AT4Ws with matching spare (it does fit under the truck but it rubs, so it’s in the bed for now.)

I have a suspension in the works, sliders on order and looking at different skids on the market. I’m also trying to find a sub box that will fit 1 or 2 10s sealed behind the seat in the back seat to replace the JBL system.


Hope it fits the forum and looking forward to talk with fellow Tacoma owne

 

[nightfire785]

Road Trip down to the Mojave Desert.

 

[Richm]

A busy few days.

• Baja Designs Squadron Pro ditch lights on Cali Raised A pillar light brackets.

• Addictive Desert Designs stealth bumper with the hoop.

• Baja Designs 20 inch s8 light bar in the bumper.

• Warn Evo 10-S in the bumper with a Factor 55 fairlead and Flatlink E.

• Baja Designs SAE fog light replacement in amber.

• Bakflip mx4 bed cover.

• Icon 17 inch wheels with 285/70/r17 Falken Wildpeak AT4Ws with matching spare (it does fit under the truck but it rubs, so it’s in the bed for now.)

I have a suspension in the works, sliders on order and looking at different skids on the market. I’m also trying to find a sub box that will fit 1 or 2 10s sealed behind the seat in the back seat to replace the JBL system.


Hope it fits the forum and looking forward to talk with fellow Tacoma owne

Which Icon wheels are those? What’s the offset?Do they poke out past the fender flares a lot?
I,m wanting to run the same tire on new wheels, but unsure on what specs/offset to get and have minimal poke.
Thanks!

 

[DogsandaTruck]

Which Icon wheels are those? What’s the offset?Do they poke out past the fender flares a lot?
I,m wanting to run the same tire on new wheels, but unsure on what specs/offset to get and have minimal poke.
Thanks!

Recons. +25 offset and I wish I could get +35 at minimum. They have a tiny bit of poke, less than half an inch, but they don’t tuck with full compression with body flex. It’s just a hair but it would be a better fit.

Now I’m looking at trimming.

 

[Pappy]

I took possession of my TRD-OR/MT truck yesterday. Drove it home from the dealer around 250 miles and got 21mpg. Truck bed will be covered with a canopy camper from Dirtbox.

Today ...

• Installed the OEM front molle panel. It will hold my 13 gallon water tank and the RV water pump.
• Installed driver's side Rago molle panel. It mounts my CO2 and propane bottles.
• Pulled the thimble sized oil filter off (90915-10009, aka N1) and replaced it with the larger F1 filter to see if it fits. No problem.

 

[SonoranSurvivalist]

Added the rear tow hooks, and installed the rear axle exhaust dump. The rock sliders I ordered from Westcott designs should be coming in any day now.

 

[Bravada]

I took possession of my TRD-OR/MT truck yesterday. Drove it home from the dealer around 250 miles and got 21mpg. Truck bed will be covered with a canopy camper from Dirtbox.

Today ...

• Installed the OEM front molle panel. It will hold my 13 gallon water tank and the RV water pump.
• Installed driver's side Rago molle panel. It mounts my CO2 and propane bottles.
• Pulled the thimble sized oil filter off (90915-10009, aka N1) and replaced it with the larger F1 filter to see if it fits. No problem.

Thanks for the heads up on the larger filter.

 

[Pappy]

Thanks for the heads up on the larger filter.

The -10010 is also an option. It's used on the turbo V6 in the Tundra and Sequoia.

 

[Bravada]

I got the Suma mirrors installed. Nice field of view improvement.

 

[nurp42]

Added Versatrax for some extra tie-down locations. When the rings are removed the tracks are flush and bed mat lays flat over the top.

Sponsored