ARB Rear Bumper Installed

[Jeff11]

Well, regarding sensor swap. Bumper has to come off to get to outer sensors.

having issue finding replacement parts for plastic bumper pads that cover bolts to hold bumper down……. I know that these won’t come off cleanly and will need replacement. So now, pay for calibration or keep searching for replacement pads

PT989-35240-AC
PT989-35240-AB
PT989-35240-AA

those are your part numbers for each of the three step pads.

Sponsored

 

[tkrum015]

Can you put the little ARB lights in the bumper with it installed or do you have to remove it?

 

[Gearman]

PT989-35240-AC
PT989-35240-AB
PT989-35240-AA

those are your part numbers for each of the three step pads.

thank you!

Will give it a shot to carefully remove pads knowing I can replace if needed.

Can you put the little ARB lights in the bumper with it installed or do you have to remove it?

I believe so, I plan to add lights soon

 

[Romer]

Well, regarding sensor swap. Bumper has to come off to get to outer sensors.

having issue finding replacement parts for plastic bumper pads that cover bolts to hold bumper down……. I know that these won’t come off cleanly and will need replacement. So now, pay for calibration or keep searching for replacement pads

They come off real easy. There is a clip on the inside that slides out and the sensor comes right out. The brfacket theey sit in would need work to get out. However, the one's provided with the bumper are for thee same size sensor so I used new Brackets and old sensors

Sponsored