Mild Rattle or Ticking Sound Drivers Side Interior.

[GMak621]

Couldn’t find anything unusual in the driver side front fender well. I would need a more specific area to look

Sponsored

 

[tacorancher]

Couldn’t find anything unusual in the driver side front fender well. I would need a more specific area to look

For me it was passenger side and it sounded like it was from inside the cabin - I’ll snap a pic later

 

[tacomasport1121]

Thanks. I have the same rattle. Thought it was the splash guard rattling in the wheel well, but wasn’t. My rattle is the same one in the video. Driving me crazy!!!! Sounds like it is from the B pillar right at ear level but might be deceiving. Wil check my front fender. We appreciate you posting a picture. I would prefer to fix myself than to have the dealership make it worse by tearing things apart.

 

[hagglethorn]

Does it sound like this?

I had this and followed this thread to fix it.

https://www.tacoma4g.com/forum/threads/wind-noise-whistle-and-rattle.4314/page-2#post-163635

 

[GMak621]

I had this and followed this thread to fix it.

https://www.tacoma4g.com/forum/threads/wind-noise-whistle-and-rattle.4314/page-2#post-163635

This is very helpful. Will check it out in the AM

 

[tacomasport1121]

Fixed my rattle!!!! I pulled off the door seal on the body of the truck, and there were little black clips that were rattling. I took a business card, ripped a piece off, folded it in Half and wedged it between the plastic clip and body of the truck. Problem solved.

 

[GMak621]

Fixed my rattle!!!! I pulled off the door seal on the body of the truck, and there were little black clips that were rattling. I took a business card, ripped a piece off, folded it in Half and wedged it between the plastic clip and body of the truck. Problem solved.

Could you please provide a photo of the location so I can pinpoint it please

 

[GMak621]

I had this and followed this thread to fix it.

https://www.tacoma4g.com/forum/threads/wind-noise-whistle-and-rattle.4314/page-2#post-163635

I didn’t see anywhere easy way to access that black piece to be able to remove it. Any tips

 

[tacomasport1121]

Sure. Will snap a picture tomorrow after work. I actually took the folded business cards out and replaced it with the soft side of sticky Velcro. Velcro’d (if that’s a word) the sticky side on the plastic clip so the padded side would be touching the metal body of the truck in the driver side b pillar. Was silent on the way home with the paper shimmed behind the clip, so I imagine the Velcro will work as well. And will stay in place. Will follow tomorrow

 

[tacomasport1121]

I didn’t see anywhere easy way to access that black piece to be able to remove it. Any tips

It pulls straight out towards the windshield. It’s on there pretty tight. Jus snapped some pics for ya.

Sponsored