What did you do TO / WITH your 4th gen Tacoma today?! 👨‍🏭 🧰 📸

[SnowmanJPS]

Oil change, tire rotation, took all the hardware out of my rock sliders and cleaned them and put anti seize on them, I had bronze but I swapped it for silver, then re undercoated them all

also my cheap Chinese drain plug gaskets worked fantastic as I knew they would, awesome bulk purchase

Sponsored

 

[oxi]

I brought home #65 and #66 trees for our lot, 10 species of 66 trees total.

I also scored 300 miles (winter blend) on full tank. Not that it matters...

I now can claim ROOT 66!

 

[VBFD Taco]

Installed the deck scene lights.

And installed the bed cap gap eliminators while I was in there.

 

[762_NateOh]

I bought it!

2024 TRD Off-Road Prem Hybrid. Certified Preowned w/ 9,000 miles.
The drive home was excellent, I really dig this thing.

 

[PNWkip]

I bought it!

2024 TRD Off-Road Prem Hybrid. Certified Preowned w/ 9,000 miles.
The drive home was excellent, I really dig this thing.

CPO is the way to go! The cpo warranty is awesome. Congrats!

 

[4GTacoHybridTRD-OR]

Installed the deck scene lights.

And installed the bed cap gap eliminators while I was in there.

Where’d you get the bed scene lights? Any info is greatly appreciated.

 

[VBFD Taco]

Where’d you get the bed scene lights? Any info is greatly appreciated.

I got them from the dealership first, but then found them $63 cheaper (even with shipping) so I returned them and just had to wait a couple more days.

Check out https://toyota.oempartsonline.com/
I took pictures as I went so plan on doing a write up when I get a chance.

 

[Will721]

I got them from the dealership first, but then found them $63 cheaper (even with shipping) so I returned them and just had to wait a couple more days.

Check out https://toyota.oempartsonline.com/
I took pictures as I went so plan on doing a write up when I get a chance.

Do you have part numbers for the ones you ordered? Was it plug and play?

 

[VBFD Taco]

Yes, completely plug and play just as long as you have lights on the inside of your bed.
I have a 6 foot bed so my part number was PT944-35241. If you have the 5 foot bed, the part number is PT944-35240.

 

[maxx075]

Yes, completely plug and play just as long as you have lights on the inside of your bed.
I have a 6 foot bed so my part number was PT944-35241. If you have the 5 foot bed, the part number is PT944-35240.

This is where it seems to get a little confusing. If you put this number in, it's generally directing you to the 35240-HW which is less than $100. Then there's an 35240-AA (Right) & 35240-AB (Left) which are labeled as Lamp Assembly, Work for $582.75 MSRP.

So I'm not sure if you need all 3 for the complete setup or not.

35240-HW
35240-AA
35240-AB

 

[VBFD Taco]

This is where it seems to get a little confusing. If you put this number in, it's generally directing you to the 35240-HW which is less than $100. Then there's an 35240-AA (Right) & 35240-AB (Left) which are labeled as Lamp Assembly, Work for $582.75 MSRP.

So I'm not sure if you need all 3 for the complete setup or not.

35240-HW
35240-AA
35240-AB

I too had that issue at first but believe me, you only need what I stated earlier. Go to a different site if you don't get a return on the numbers I posted. I had to talk to the parts department to get the right answers.
Check out https://toyota.oempartsonline.com/

 

[bvdbrug]

Starting a general thread for all things mods done to your 4th gen! From super basic to super expensive! I picked up my underground yesterday. Ordered the TRD High flow air filter for it already as a simple start.

 

[franx]

dropped off my taxes to get done at the accountants office

 

[oxi]

I brought home #65 and #66 trees for our lot, 10 species of 66 trees total.

I also scored 300 miles (winter blend) on full tank. Not that it matters...

I now can claim ROOT 66!

Later that day, the huge blizzard struck Wisconsin. We got 20 to 25" of snow, yippie.

I tied the trees to the deck to survive the 40-50 mph winds. The snow throwing image of the driveway was on Sunday, I did the same thing on Saturday from the first round. Double whammy with this storm.

The deck is a 3-step to get down or up to it.

 

[skyking3]

I got my TRD center pipe from the 40% TRD sale for last weekend and also got the dealer discount of just over 18% which is over half off so I could not resist that deal. I waited until Monday which was the last day of the sale because I had read mixed reviews and really was not convinced that it would be worth it. The sound is not much better than the TRD Pro axle back exhaust with the twin pipes but at least there is still no drone. Looking down the pipe that goes to the muffler I could see a slightly different pattern but have no idea if it provides a freer flow of exhaust. What should have taken an hour to install took over 4 hours because one of the holes for the spring bolts was not properly centered. It took 3 hours to determine what the problem was and had to ream out the hole to get the bolt to fit. Hopefully, I will grow to like this mod over time. I feel that the axle back TRD Pro exhaust was definitely worth the money though.

Sponsored