What did you do TO / WITH your 4th gen Tacoma today?! 👨‍🏭 🧰 📸

[Will721]

If they install the same as ark flaps there's no hardware change required. The bolts and plastic grommets are already there holding the flare and fender liner. Just pull out the bolts, position flaps, and put them back in. Arks came with a bit different style of bolt which I used but weren't necessary. Frankly the easiest install of mudflaps on any vehicle I've seen.

Sponsored

 

[ScottyMcfly]

If they install the same as ark flaps there's no hardware change required. The bolts and plastic grommets are already there holding the flare and fender liner. Just pull out the bolts, position flaps, and put them back in. Arks came with a bit different style of bolt which I used but weren't necessary. Frankly the easiest install of mudflaps on any vehicle I've seen.

Awesome, thank you.

 

[PNWkip]

Those are the ones I was thinking about going with. Do I need to get the inserts/fender grommets to install since my truck didn't come with flaps ?

We don't have flares and I didn't have OEM flaps so I didn't have any hardware on the truck, just female fender grommets, but both the Arks and the Tufskinz come with their own hardware that will screw right into the female grommets on the truck. I ordered a back of 100 grommets for like $1.50 on amazon in case I stripped any.

 

[Leucosia]

Did a mini road trip over the weekend to Vegas. Our office participates in a 120 mile relay race from baker to Vegas and I was a support driver and ended up running one of the legs of the relay because the original runner couldn’t make it. This is me getting home on Sunday. Not pictured is the hour or two the next day cleaning all the dead bugs off the front and reapplying some griotts 3in1 and rainx ceramic.

 

[Ironhide]

Banks Ram-Air installed.

 

[SnowmanJPS]

Recut new fog light vinyl and installed, would someone be able to measure their non rigid OEM fog lights and tell me if they’re 5 15/16” x 5/8”, wondering if any of the thicker inserts would fit

 

[Ironhide]

Recut new fog light vinyl and installed, would someone be able to measure their non rigid OEM fog lights and tell me if they’re 5 15/16” x 5/8”, wondering if any of the thicker inserts would fit

6-9/16“ x 1-3/8” plus or minus a bug or two on my SR5.

 

[SnowmanJPS]

6-9/16“ x 1-3/8” plus or minus a bug or two on my SR5.

just the lens part?

 

[ScottyMcfly]

just the lens part?

i just happened to have a set right here out of the truck

 

[Ironhide]

just the lens part?

Yes, just the lens face.

 

[ScottyMcfly]

just the lens part?

I'm pretty sure when I cut mine I did it 1-3/4" x 6-7/8" if I remember correct

 

[dvrgz]

earnin stripes 🫠

 

[lauren01]

earnin stripes 🫠

Yeeeowwwch! I am so sorry to see those boo-boos. Hope it gets fixed up nicely.

 

[RutsyBucket]

First 4th gen on Bilstein 6112s! Ride is so good.

 

[SnowmanJPS]

Yes, just the lens face.

Oh wow they’re very different, thank you for the help guys, @ScottyMcfly as well

Sponsored