HOW TO: Rigid SR-L Series Lights for ARB Rear Bumper Installation

[Benny]

They are telling us any time. They said they are boxing them now.
John

My ARB bumper just arrived, sounds like mounting the lights before I install the bumper will save me some headaches!

Sponsored

 

[BLtheP]

My ARB bumper just arrived, sounds like mounting the lights before I install the bumper will save me some headaches!

I installed my lights with the bumper already installed. It was a complete non event. A Torx driver screwdriver style works well rather than a ratchet and Torx bit.

 

[TRBO4X4]

I'm having a heck of a time figuring out the AUX switch configuration on my 2026 Trailhunter. I bought the 2025+ kit and have 2 sections of harness remaining (see pics). Either I'm slow, or almost every guide I've found has slightly different connectors. I'm getting hung up on #11 from the OPs guide. My red halo and reverse lights work great... I would just like to figure out how to wire the AUX.

Extra context: I have the jumper already plugged into the engine bay. I have AUX 2 utilized for ditch lights. Diagram in the manual shows the jumper sends AUX 3 and 4 to the back of the truck. I have the connector in sight, just not sure where to splice (or if I use one of the attached images connectors or just splice in myself) for the "short harness". TIA

 

[Rubenc87]

Did your kit look like this?

 

[TRBO4X4]

Did your kit look like this?

Wish I took a pic of the bags before but didnt. Looks somewhat similar. The gray connectors you have in the left bag are different so possibly a version change? I have an email out to SPV already as one of the lights seemed to have a manufacturing defect in the lens... so I'll see about getting more direct support from there. Thank you!

 

[Rubenc87]

I ordered mine last year and not sure if the kit has changed but this kit made everything very easy to install.

Sponsored