Rear Coil Recommendations for ~400# constant on TH bed

[trailhunger]

Anyone know offhand the product codes for ARB OME & Dobinson for the TH rear coil upgrades that are designed for ~400# constant on the bed?

I'm keeping the stock tire dims, only interested in eliminating some sag in the rear, it's not bad TBH, impressed at how well it's handled & distributed thus far. But once I have the gear slide built & installed probably gonna really want that upgraded rear spring kit.

Gracias Usted

Sponsored

 

[trailhunger]

Open Ai deep research yielded this. Anyone installed any of this equipment? Ride quality? Cheers

 

[Pappy]

I have more weight than you do. Lots more. I installed the 819V springs in the rear on Dobinson's recommendation, and they compensated for the weight, but I didn't get the lift I wanted. The 819V were pulled and I installed 821V and it's better, but still not where I want it. I think the weight recommendations from Dobinsons is optimistic. Here is what Dobinsons says about their rear springs:

Rear Coil Spring Specs:

• C59-869V (30mm - 1.25") Stock Load / (Stock Height) 50-100lbs
• C59-817V (55mm - 2.25") 50-100lb Load / (30mm - 1.25") 175-330lb Load
• C59-819V (55mm - 2.25") 175- 330lb Load / (30mm - 1.25") 440-660lb Load
• C59-821V (55mm - 2.25") 440-660lb Load / (30mm - 1.25") 880-1210lb Load
• C59-823V (55mm - 2.25") 880-1210lb Load / (30mm - 1.25") 1400-1600lb Load
• C59-825V (55mm - 2.25") 1400-1600lb Load / (30mm - 1.25") 1800-2000lb Load

My 819V are available if you want to chat.

Pic with the 819V. Camper-canopy: 450#. Rear bumper with dual swing-outs: 350#.

 

[trailhunger]

I have more weight than you do. Lots more. I installed the 819V springs in the rear on Dobinson's recommendation, and they compensated for the weight, but I didn't get the lift I wanted...

thanks for the info...
I like that Dirtbox setup, nice rig. Had I went w/a Tundra, the Dirtbox was my #1 preference.

 

[Pappy]

I like that Dirtbox setup, nice rig. Had I went w/a Tundra, the Dirtbox was my #1 preference.

I looked at a lot of canopy-campers. The Dirtbox stood out, by a long shot. It's not perfect, but nothing was.

 

[Wife bought my 24 TRD]

Anyone know offhand the product codes for ARB OME & Dobinson for the TH rear coil upgrades that are designed for ~400# constant on the bed?

I'm keeping the stock tire dims, only interested in eliminating some sag in the rear, it's not bad TBH, impressed at how well it's handled & distributed thus far. But once I have the gear slide built & installed probably gonna really want that upgraded rear spring kit.

Gracias Usted

Dobson 819 rear coils i have them on my 24 Tacoma I'm not sure if they'll work with the trail hunter. I don't know why they wouldn't

 

[grizzlyoutlaw]

Im pretty sure I will be pulling the trigger on Icons dual rate setup. Rated for +.5” +600 lbs and a pretty good sale this week.
https://iconvehicledynamics.com/acc...ar-5-lift-dual-rate-overland-coil-spring-kit/ICON 2024-2025 Toyota Tacoma, Rear, .5" Lift, Dual Rate Overland Coil Spring Kit - Icon Vehicle Dynamics

 

[Beto]

I have more weight than you do. Lots more. I installed the 819V springs in the rear on Dobinson's recommendation, and they compensated for the weight, but I didn't get the lift I wanted. The 819V were pulled and I installed 821V and it's better, but still not where I want it. I think the weight recommendations from Dobinsons is optimistic. Here is what Dobinsons says about their rear springs:

Rear Coil Spring Specs:

• C59-869V (30mm - 1.25") Stock Load / (Stock Height) 50-100lbs
• C59-817V (55mm - 2.25") 50-100lb Load / (30mm - 1.25") 175-330lb Load
• C59-819V (55mm - 2.25") 175- 330lb Load / (30mm - 1.25") 440-660lb Load
• C59-821V (55mm - 2.25") 440-660lb Load / (30mm - 1.25") 880-1210lb Load
• C59-823V (55mm - 2.25") 880-1210lb Load / (30mm - 1.25") 1400-1600lb Load
• C59-825V (55mm - 2.25") 1400-1600lb Load / (30mm - 1.25") 1800-2000lb Load

My 819V are available if you want to chat.

Pic with the 819V. Camper-canopy: 450#. Rear bumper with dual swing-outs: 350#.

Hey Pappy... do you still have those coils available?

 

[Pappy]

Hey Pappy... do you still have those coils available?

The 819V's? Yep. Boxed up and ready to ship.

 

[Beto]

What are you asking? I just got a bed rack and RTT for my Trailhunter, and could use a coil upgrade.

 

[Pappy]

What are you asking? I just got a bed rack and RTT for my Trailhunter, and could use a coil upgrade.

$150 plus the ride.
https://www.tacoma4g.com/forum/threads/dobinson-c59-819v-rear-springs-for-gen4-tacoma.13249/

 

[Beto]

Sold. I'll hit you with a DM.

Sponsored