What did you do TO / WITH your 4th gen Tacoma today?! 👨‍🏭 🧰 📸

[Ironhide]

Installed a pair of left and right bed storage boxes. Thanks to Jlevitt95 over at Tacoma World for and excellent write up to reference.

https://www.tacomaworld.com/threads...side-bed-storage-cubby-on-2019-models.818770/

Found the boxes on eBay for $150 delivered. Listed as a set, removed from a ‘12 Tacoma. Took about 2 hours to install and was fairly straightforward thanks again to the write up. The only thing to note was the inner-most upper rivet, on both sides, ended up right next to a bed reinforcement. Although both rivets did expand and torque down just fine, moving the measurements about a 1/4” towards the rear of the truck would give the rivets a tad more room to expand.

Sponsored

 

[lauren01]

Made a 200-mile round trip yesterday to buy used camping gear for the Subaru. Got a 5’ Kammok awning and Trailhead RTT for $900, items are 2 years old. Pic attached of the ‘19 TRD Pro that those items came off.

We’ll try the 5’ Kammok on the truck too. Might try to find a used 7’ Kammok for the truck. Roof racks for each vehicle are ordered, Sherpa for both.

This morning made another 200-mile round trip to have our OTT tuner reinstall the Stage 1 tune on our Trailhunter after a dopey dealer reflashed my ECU to fix a problem. Thank you Q in Westminster, CA.

So nice to have the tune back in the truck’s matrix. Smoother shifts, she purrs nicer and got +2 mpg to boot. Truck has 9200 miles.

 

[Viper_00]

Installed the bed light scene

 

[TacoBirdinNW]

First trip with the Topo Topper in rain and wind on the Olympic Peninsula. No problems! Love my Tacoma and love the Badlander.

 

[lauren01]

Gave her a bit of a scrub yesterday late afternoon. This is what the new tires look like on the Trailhunter. Mickey Thompson Baja Boss A/T.

Muddy posed next to the vanity plate.

 

[lauren01]

After yesterday’s exterior wash, we knocked out the installation of a new Sherpa Rainier roof rack starting this morning. It was straightforward and fun to get ‘er done. We may be repositioning the crossbars or adding one across the back depending on what we want to mount. Once I get the correct mounting hardware, we’ll put on the Kammok 7’ awning that I picked up used for $650. It may be that a crossbar on the back will block the trailer camera signal. For now, we’ll run with the bars positioned as is since we are going to be taking our trailer out soon.

We’re happy with this U.S.-made rack. The quality of every component including hardware is excellent.

 

[AltarBoy]

Took my new to me (2013) jetski down to the hudson river for a little rippy session

 

[Administrator]

Post what you've done with your Tacoma today/recently ??‍

Sponsored