What did you do TO / WITH your 4th gen Tacoma today?! 👨‍🏭 🧰 📸

[CAMTuning]

Yeah, I've seen your posts. I had a Gladiator Rubicon, but tired of the shitty mpg and dual batteries. The aux battery is a pain to change and left me on the highway two times.

I will keep an eye out for you around town. We get some of the local guys together and run the arroyos every now and then. There's a great group of overland guys over at ih8mud that @Pappy introduced to me. They get together regularly for coffee and breakfast.

Sponsored

 

[Pappy]

There's a great group of overland guys over at ih8mud that @Pappy introduced to me. They get together regularly for coffee and breakfast.

Yep, the wonderful world of High Desert Cruisers. Next breakfast.

 

[Zjohn14]

What’s up everyone!! Been stalking this forum for a hot min now and have never taken the time to post. Love scrolling thru and looking at all the different 4th gen Taco builds!
Anyhow here’s my 24 SR (wannabe TRDPRO) since having it for lil over a yr now I’ve done all sorts of different mods! Level kit, heritage grill, Lexland front bumper, wrap on roof, tint, Rough country hood scoop, fender flares, running boards, rear fender liners, hard roll up bed cover plus others an lots of small mods to interior
Next major change will be finally getting my rear bumper installed, as well as Bilstein 5100 front struts w/ Alldogs OR springs, & Superpro UCAs have the Bilstein struts on 3rd clip settin so w/the springs should get bout 3-3.5” lift up front. Already installed Bilstein rear shocks it gave rear just shy of 1/2” lift. Will lift the rear another 1” with Alcan springs shackles. Hoping to get everything installed this weekend. cheers

 

[Will721]

What’s up everyone!! Been stalking this forum for a hot min now and have never taken the time to post. Love scrolling thru and looking at all the different 4th gen Taco builds!
Anyhow here’s my 24 SR (wannabe TRDPRO) since having it for lil over a yr now I’ve done all sorts of different mods! Level kit, heritage grill, Lexland front bumper, wrap on roof, tint, Rough country hood scoop, fender flares, running boards, rear fender liners, hard roll up bed cover plus others an lots of small mods to interior
Next major change will be finally getting my rear bumper installed, as well as Bilstein 5100 front struts w/ Alldogs OR springs, & Superpro UCAs have the Bilstein struts on 3rd clip settin so w/the springs should get bout 3-3.5” lift up front. Already installed Bilstein rear shocks it gave rear just shy of 1/2” lift. Will lift the rear another 1” with Alcan springs shackles. Hoping to get everything installed this weekend. cheers

Idk how your doin for scratch, but I would absolutely love to see this truck get some power mods and get another member with a pro to do a head to head. Being an Sr and not even an SR5 it would be hilarious if this thing managed to outperform a pro at half the cost.

 

[CAMTuning]

Idk how your doin for scratch, but I would absolutely love to see this truck get some power mods and get another member with a pro to do a head to head. Being an Sr and not even an SR5 it would be hilarious if this thing managed to outperform a pro at half the cost.

That would be amazing, and 100% doable. It's just like in Subaru when the guys get a base model and make it faster than the STi.

 

[SnowmanJPS]

I bit the bullet, even at 6’4” I can’t easily get into the bed when I need to, neither can my old man, so I finally bought the SXTH element relocation bracket and the cheapest Amazon step and it turned out great, I saw others having figment issues and it really kept me from pulling the trigger sooner especially since this bracket after tax and shipping was $180 but very satisfied

 

[shackley]

I will keep an eye out for you around town. We get some of the local guys together and run the arroyos every now and then. There's a great group of overland guys over at ih8mud that @Pappy introduced to me. They get together regularly for coffee and breakfast.

Sounds good.

I bit the bullet, even at 6’4” I can’t easily get into the bed when I need to, neither can my old man, so I finally bought the SXTH element relocation bracket and the cheapest Amazon step and it turned out great, I saw others having figment issues and it really kept me from pulling the trigger sooner especially since this bracket after tax and shipping was $180 but very satisfied

Yeah, whomever designed that adapter is a genius. My dealer has entered an agreement with SXTH to provide it at the parts counter.

 

[Zjohn14]

@Will721
Well I do have plans on soon ordering a CIA just unsure which one, leaning towards Stillen or AFE mainly because both offer the scoop which I would imagine helps with more air flow. After the CIA I plan on doing OTT tune which was told by @JustDSM the SR trim usually gains 70/80hp-tq from the stage 1 tune. Also looking at going with AFE charge pipes and rock basher exhaust. All the above mods should easily add 100+hp! Planning on ordering all above parts with in next month or so as well having tune done. Look forward to seeing how much of difference it’s going make

 

[PNWkip]

Bilstein 5100s installed @ 1.4" last night

 

[GMak621]

There’s not much snow but I found some

 

[Ironhide]

Before, stock height with 265/65R18 Kumho RT. And after, Pro Comp (ReadyLIFT) 1.5” leveling kit with 275/70R18 Pirelli XTM AT.

 

[SnowmanJPS]

I love being able to utilize parking spots at Costco little cars can’t normally get into because of the snow, safer parking spots for me

 

[Administrator]

Post what you've done with your Tacoma today/recently ??‍

 

[Mtnbikes]

Just had the Eibach Pro Truck 2r installed.

Sponsored