Alldogs Offroad Front Springs Installed!

[GoodMoodley]

Yes I am trying to see if they get in line or upper control arms with adjustment will be needed?

Here is where the alignment ended up. Drives fine

Sponsored

 

[Tacoyaki]

In case anyone's interested, here's latest heigh measurements after installing Alldogs front springs (already had Dobinsons 821 rear springs) (wheel center to fender edge):

Front: ~21.5"
Rear: ~23.75"

There's some load in the truck (guessing ~850-900 lbs...fully loaded I'm closer to 1100 lbs). It's hard to tell if I'm at the center of the wheel and if my tape measure is actually vertical, so +/- 0.25".
So ~2.25" rake that will probably drop to 1.75-2" when fully loaded.

I also did the ECGS bushing and the Icon reinforcement top plate at the same time.