Alldogs Offroad Front Springs Installed!

[GoodMoodley]

Yes I am trying to see if they get in line or upper control arms with adjustment will be needed?

Here is where the alignment ended up. Drives fine

Sponsored

 

[Tacoyaki]

In case anyone's interested, here's latest heigh measurements after installing Alldogs front springs (already had Dobinsons 821 rear springs) (wheel center to fender edge):

Front: ~21.5"
Rear: ~23.75"

There's some load in the truck (guessing ~850-900 lbs...fully loaded I'm closer to 1100 lbs). It's hard to tell if I'm at the center of the wheel and if my tape measure is actually vertical, so +/- 0.25".
So ~2.25" rake that will probably drop to 1.75-2" when fully loaded.

I also did the ECGS bushing and the Icon reinforcement top plate at the same time.

 

[rybern]

So far I’m liking the springs. No more hitting the bump stops. I’m also able to carry 600 pounds of salt without sagging now. First pic is just after install. Second is after it settled and bed empty. Third is with 500 pounds of salt.

Great info that helps me. Great looking truck. Do you have any photos with better lighting after the springs settled?

 

[rijc99]

Great info that helps me. Great looking truck. Do you have any photos with better lighting after the springs settled?

Thanks, Toyota won’t make me a non hybrid Pro with under seat storage and regular front seats so I made my own.

This one in front of my house is after it settled. But I wanted the front a little higher so I put 0.9 inch Trailhunter spacer from Peak Suspension (next to building photo). Caveat, this did take it out of range for the offroad upper control arms so I had to get the TRD ones.

Sponsored