Trailhunter OEM Onboard Tire Inflator/Air Compressor Retrofit into Tacoma Offroad Premium DIY

[cgdmnky]

I guess I would have to rethink all that. Thanks for the tip.

Sponsored

 

[Bravada]

it's not just the sliver hose, that's just for air up. there's also an electrical connector for power as well as a blue tube i assume is for air down.

i suppose you could try it but at that point i'd personally just use a portable setup. seems like the worst of both worlds (added complexity & cost, + you still have to lug around the compressor).

I agree with cape_taco, if you are on lease, you are better served with a portable compressor.

 

[cgdmnky]

Thank you, both!

 

[TrustButVerify]

Bonus one, I took some pics of the unit from underneath the truck and noticed yet another spare mystery connector up there near the top of the bed....

Any guesses what that could be for? Perhaps for the Trailhunter Scene Lights (do i smell another retrofit coming soon???)?

That mystery connector isn't anything. It's the dust cap cover for your powered connector. It should remain attached to the wiring harness running down.

 

[cape_taco]

That connector could be for the prewired aux switch. I believe that’s where mine is on my TrailHunter

Following up this isnt the aux plug. The rear aux plug is near the middle of the bumper. Anyone got other ideas?

 

[cape_taco]

That mystery connector isn't anything. It's the dust cap cover for your powered connector. It should remain attached to the wiring harness running down.

ahhh just seeing this. yes that makes sense that it's a dust-cap, ok mystery solved for now

Sponsored