Sponsored

scythanith

Trailhunter
Well-known member
First Name
Scott
Joined
Oct 4, 2024
Threads
3
Messages
67
Reaction score
68
Location
Saskatchewan
Vehicle(s)
2024 Tacoma Trailhunter 6' bed
I did the same with mine several weeks ago. Love it!
Excuse my ignorance here. I thought we only had Aux 1-3 on the 2024 TH's? Did you run your own wiring to make an Aux 4 for your bumper lights? If so, would you be willing/able to share how? I'd like to preserve my 3 aux switches and hate the blank to the right of them.

Cheers!
 

JimScotty0

TRD Pro
Well-known member
First Name
James
Joined
Mar 17, 2025
Threads
0
Messages
59
Reaction score
29
Location
The Farm, Central Washington
Vehicle(s)
2024 Toyota Tacoma
Excuse my ignorance here. I thought we only had Aux 1-3 on the 2024 TH's? Did you run your own wiring to make an Aux 4 for your bumper lights? If so, would you be willing/able to share how? I'd like to preserve my 3 aux switches and hate the blank to the right of them.

Cheers!
I have a 24 Pro which only came with AUX 1-3. I didn't want to use the higher amp 1 & 2 switches for the rear lights that only needed about 2-3 amps. What I did was to repin the jumper connector to use the AUX 3 power and switch. I took out AUX 1 and replaced it with AUX 3. I now have AUX 1 & 2 free to use as I need for future options. I also have a 6 gang AuxBeam switch that I use for other lighting. So my AUX 3 is the switch I use to turn on/off my rear lights.

I replaced my AUX 3 switch with this, and still have a blank on the right.
2024 Tacoma HOW TO: Rigid SR-L Series Lights for ARB Rear Bumper Installation 1758699543805-37


Here is what I put together back on May 14th, 2025 describing my process.

Project still in the works, but I did finish the Toyota pigtail jumper.

This is the original Toyota Jumper.
20250422_182221.jpg


Unpinned the Black wire (AUX1) and pinned the White wire (AUX3) using a similar pin as used in the Toyota harness.
20250512_164500.jpg


I believe this pin is a 621-2-2A
1747291604442-dd.webp


Using my own 3 pin waterproof female connector, I crimped the pins on AUX1, AUX2, and Ground.
20250512_173151.jpg


Here is how it looks when finished. I will build a male 3 wire pigtail jumper for future potential use if or when needed and tuck it away. I have no plans for use right now since I will be using my Auxbeam RGB 6 Gang Switch for most of my lighting project which includes ditch pod lights, fang lights, grill DRL lights, and a hood scoop light.
20250512_173847.jpg
2024 Tacoma HOW TO: Rigid SR-L Series Lights for ARB Rear Bumper Installation 1758699531521-at
 
 






Top